Make the emulated 6551's soft ("program") reset state match the MOS datasheet.

The only description of the effects of "program reset" in the original MOS
datasheet is in the section for each register. The W65C51S and W65C51N
datasheets have a heading "PROGRAM RESET OPERATION", but it amounts to:

- internal registers are modified as described in the section for each register
- changes to the DTR, DCD, and DSR pins which Symon does not emulate
- the overrun flag is cleared

...which is what this new implementation does.

It would make *sense* for the reset to do things like "cancel transmission or
reception in progress" and stop asserting an interrupt, as the old code did,
but I can't find any evidence of such behaviour in the datasheets.

src/main/java/com/loomcom/symon/devices/Acia6551.java

@@ -211,13 +211,16 @@ public class Acia6551 extends Acia {
 
 
     private synchronized void reset() {
-        txChar = 0;
-        txEmpty = true;
-        rxChar = 0;
-        rxFull = false;
-        receiveIrqEnabled = false;
-        transmitIrqEnabled = false;
-        interrupt = false;
-    }
+        // Figure 6 in the 6551 ACIA data sheet says the "program reset"
+        // event does not modify the control register.
 
+        // Figure 7 in the 6551 ACIA data sheet says the "program reset"
+        // event keeps the "parity check" configuration in the command
+        // register, but resets the other bits to defaults.
+        setCommandRegister((commandRegister & 0xe0) | 0x02);
+
+        // Figure 8 in the 6551 ACIA data sheet says the "program reset"
+        // event clears the "overrun" flag but otherwise has no effect.
+        overrun = false;
+    }
 }