0cfa04fe2f
creality.ini: add Ender-4
2021-02-18 19:20:54 +01:00
138501338c
creality.ini: add safe zone for Ender-3 V2
2021-02-18 19:06:03 +01:00
fbd8d57adc
Modified possibly problematic start/end g-code Mega
2021-02-18 17:19:41 +01:00
6da9f5aff9
Ender-6 thumbnail
2021-02-18 16:50:28 +01:00
669e8d573c
Merge pull request #6069 from pmjdebruijn/creality_start_gcode_2
...
creality.ini: improve start_gcode comments
2021-02-17 22:52:11 +01:00
991bab61bb
creality.ini: support CR-6 SE pause print
2021-02-17 19:49:15 +01:00
e3ea71a0d6
creality.ini: improve start_gcode comments
2021-02-17 18:39:59 +01:00
e7ffcec29e
creality.ini: add Ender-6
2021-02-15 13:53:55 +01:00
66976bb954
Merge pull request #6021 from pmjdebruijn/creality_max
...
creality.ini: add Ender-3 Max
2021-02-12 14:04:34 +01:00
5a5d9d0e53
Thumbnails for new Creality models.
...
https://github.com/prusa3d/PrusaSlicer/pull/5968
https://github.com/prusa3d/PrusaSlicer/pull/6021
2021-02-12 14:03:38 +01:00
b0e5ab8d47
Updated CR6 thumbnail.
2021-02-12 12:31:05 +01:00
f8b660e08e
Initial Artillery bundle
...
Artillery Sidewinder X1
Artillery Genius
https://github.com/prusa3d/PrusaSlicer-settings/pull/122
2021-02-12 11:45:36 +01:00
6e994b2882
Artillery resources
2021-02-12 11:43:19 +01:00
104c560575
creality.ini: Move Ender-3 V2 into proper order
2021-02-11 17:31:51 +01:00
5dbd503d3d
creality.ini: add Ender-3 Max
2021-02-11 17:24:01 +01:00
0b4720338f
Merge pull request #5968 from pmjdebruijn/creality_max
...
Creality CR-6 Max / CR-10 Max / etc
2021-02-09 09:19:40 +01:00
310531d2db
Updated Kossel bed textures.
2021-02-08 23:43:21 +01:00
1d0484a25d
Anycubic 0.0.7 Updated start g-code
2021-02-08 23:41:13 +01:00
d135bd86de
creality.ini: Add Extrudr GreenTEC Pro filament
2021-02-08 17:07:41 +01:00
7f925e700b
creality.ini: add experimental support for CR-X (Pro)
2021-02-07 16:45:14 +01:00
723e0b6e9d
creality.ini: Add safety zone for CR-10 S Pro
2021-02-07 15:43:48 +01:00
8feef8bcf0
creality.ini: add vendor associated color for Das Filament
2021-02-07 15:03:09 +01:00
8ff82cc1d2
creality.ini: increase CR-6/CR-10 Max retract_length slightly
2021-02-07 13:48:28 +01:00
622664ef8e
creality.ini: Add CR-10 Max
2021-02-05 17:28:44 +01:00
6373c7f1cb
creality.ini: Add CR-6 Max and add safety border to CR-10 S4
2021-02-04 18:41:17 +01:00
a4a465b9a6
creality.ini: Creality CR-6 SE improvements
2021-02-03 17:34:06 +01:00
e52efe48b0
Creality CR-6 SE thumbnail
2021-02-02 11:40:58 +01:00
c8e5277f0c
Updated print temperature for Das Filament PLA
...
https://github.com/prusa3d/PrusaSlicer/issues/5693
2021-02-01 21:22:30 +01:00
a2a0a86138
Creality 0.0.13
2021-01-29 10:44:35 +01:00
31e7a60494
Creality - bumped up version to 0.0.13
2021-01-29 10:43:34 +01:00
3009b314c8
Merge pull request #5908 from pmjdebruijn/creality_4
...
creality.ini various improvements
2021-01-28 23:48:36 +01:00
0168fc612a
Updated bed_texture for Anycubic Kossel
2021-01-28 23:38:45 +01:00
7b3a06fd05
Updated Anycubic Kossel bed models.
2021-01-28 23:35:38 +01:00
c9ebc18a10
Added Anycubic Kossel texture
...
from https://github.com/prusa3d/PrusaSlicer/pull/5747
2021-01-28 23:34:43 +01:00
1f9fe92720
creality.ini: hide CR-6 SE until next release
2021-01-28 18:14:19 +01:00
ba87613454
creality.ini: update start_gcode/end_gcode comments
2021-01-28 18:13:45 +01:00
ba6a40bcce
creality.ini: add CR-6 SE
2021-01-27 17:42:32 +01:00
f2a624007b
creality.ini: enable more filaments by default
2021-01-27 17:34:38 +01:00
5fa4880eac
creality.ini: add comments
2021-01-27 17:15:43 +01:00
ed04eb1f20
creality.ini: remove superfluous printer_variant from ENDER3V2
2021-01-27 17:04:13 +01:00
93da13b0a3
creality.ini: set slowabl to 120C to match fastabl
2021-01-25 21:06:50 +01:00
c27ab57c18
creality.ini: use 120C nozzle temp for bed leveling for CR-6 SE
...
it seems the CR-6 SE uses 120C for it's strain gauge based bed leveling,
so we'll make this our general default, so we can limit the number of
start_gcode variants we'll need to maintain.
this also introduces a 10 second dwell before any homing happens, to
allow the nozzle to warm up, so that any filament stuck on the nozzle
becomes somewhat pliable.
2021-01-25 20:32:22 +01:00
5f9cf7cfae
creality.ini: Move print head further up for low prints
...
With low prints, moving the print head up 70mm can still be too low
to be able to remove a print conveniently, so make sure the print head
is at least 60% up at the end of a print.
2021-01-25 17:22:13 +01:00
78354ee991
creality.ini: reduce prime line in start_gcode
...
reduce the prime line sufficiently so the Ender-2 no longer requires
a seperate start_gcode
the extrusion pressure is scaled proportionately, and reduced slightly,
as previously some nozzle ooze could happen between the prime line and
the skirt loops due to excessive pressure buildup
2021-01-24 13:09:22 +01:00
6bcdf0999c
creality.ini: universal end_gcode improvement
...
Replace hardcoded print presentation coordinate with print_bed_max[1],
where we move the print bed ~3/4 of the bed size across the y axis
at the end of the print.
2021-01-24 12:40:52 +01:00
4ede5c3959
creality.ini: Ender3 V2 naming consistency
2021-01-23 19:31:23 +01:00
6955e8ec08
creality.ini: raise Das Filament PLA bed temp
...
At 50C prints with sharper corners can be prone te warping if the
first layer height isn't quite optimal, and given that most Creality
printers don't have ABL, it often isn't.
So to optimize chances of getting good non-warped prints, we keep
all PLA bed temps at 60C for Creality printers.
2021-01-23 19:12:01 +01:00
231cd758c1
creality.ini: improve nonabl start_gcode
2021-01-23 19:09:29 +01:00
23ddb33237
1.2.2 Added Prusament PVB. Added 0.8mm nozzle profiles.
2021-01-08 10:57:41 +01:00
250ef23fd5
Updated 0.0.12 description
2021-01-08 09:44:09 +01:00
Pascal de Bruijn