8e27e355c2
Fixing unit tests.
2021-03-15 09:55:56 +01:00
2455aee97c
Further reduction of Perl Config.pm methods.
2017-10-27 18:52:35 +02:00
401059066e
Switched to Perl local::lib for local compilation.
...
Taken from upstream Slic3r, thanks @alexrj.
2017-08-18 09:58:50 +02:00
f0325575c2
Slic3r has been modified to propagate the following filament specific
...
values to GCode generator, one per active extruder:
bed_temperature
bridge_fan_speed
cooling
disable_fan_first_layers
fan_always_on
fan_below_layer_time
first_layer_bed_temperature
max_fan_speed
min_fan_speed
min_print_speed
slowdown_below_layer_time
Now it remains to extend Slic3r to correctly apply these values.
2017-06-21 16:15:39 +02:00
e0a24f94c0
Removed Object.pm support_material_flow method.
2017-06-08 18:13:12 +02:00
616788a600
Disabling the support tests until the test suite is modified
...
for the new supports.
2017-02-26 23:16:26 +01:00
38cb2842ac
support_material_synchronize_layers implementation
2016-11-30 16:06:12 +01:00
13b63d06ed
Use thick raft layers as we do for support material layers. #2723
2015-03-09 20:00:55 +01:00
d8ee9dd5f5
Limit first object layer height correctly when using a larger support material extruder. #2722
2015-03-09 19:27:57 +01:00
095391d702
When using raft, validate first layer height against support material extruder only instead of taking other extruders into account, thus potentially allowing larger nozzles to be used for it. #2701
2015-03-06 21:35:00 +01:00
722e94513c
Refactoring: removed the non-idempotent init_extruders() step. Also, infill_extruder was not limited to the available number of extruders when slicing from the plater, and support material extruder was considered also when support material was disabled
2015-03-06 09:56:58 +01:00
6eb1fa36ed
Bugfix: bridge speed was still used for first object layer above raft when support_material_contact_distance == 0. Includes regression tests. #2656
2015-02-14 12:47:33 +01:00
7b980c1dc9
New option for vertical distance between object and support material, with special handling of the 0 case that disabled bridge flow/speed in order to allow for soluble material. #2491 #2272 #2069 #1942 #2435 #1703
2015-01-19 09:52:24 +01:00
33f7b08c80
Fix t/support.t after changing contact distance on top surfaces
2014-12-24 12:11:30 +01:00
21ea100d0e
Fixed tests
2014-12-17 01:15:47 +01:00
59f0c64e1c
Fixed regression test for #2301
2014-11-07 17:27:16 +01:00
4b013d7a48
Added failing test for bridge speed not being used for first object layer above support material. #2301
2014-10-18 14:08:40 +02:00
82e2dd4e62
Bugfix: wrong number of raft layers in some situations due to a numerical error
2014-06-11 21:58:28 +02:00
4e5f7d74ff
Bugfix: wrong handling of large number of raft layers. #2041
2014-05-25 23:17:00 +02:00
7ba08c90cf
Refactoring to Model API for making it stricter and safer
2014-05-09 14:24:35 +02:00
9c7cc484bc
Update t/support.t still assuming default support material pattern was honeycomb
2014-03-27 00:28:26 +01:00
66045faf81
Fix error in t/support.t
2014-01-14 13:41:39 +01:00
89d3dbaa5a
Bugfix: incorrect number of raft layers was generated when too few were requested. #1678
...
Conflicts:
lib/Slic3r/Print/Object.pm
2014-01-11 23:26:48 +01:00
07b9b12475
Make tests pass
2014-01-05 00:36:33 +01:00
5bf0942f45
Satisfy test suite and CLI
2014-01-02 17:24:23 +01:00
20f1f3d2b4
Fix regression preventing raft from being generated for the entire object footprint. #1614 #1567
2013-12-23 20:31:50 +01:00
c08d4cc798
Fixed support unit tests and reduced dependency on $object
2013-10-26 17:56:59 +02:00
a7989e382c
Bugfix: enabling raft layers generated support for the whole model. Includes regression test. #1375
2013-09-17 23:51:30 +02:00
d69c956e75
Update t/support.t
2013-09-17 23:32:01 +02:00
73c05a6092
Moved vibration limit to its own G-code filter
2013-08-28 20:37:56 +02:00
913f401280
Merge new-support2
2013-07-29 20:50:26 +02:00
7a8e1e778a
New test to ensure brim and raft are extruded with the support material extruder. #123
2013-06-07 13:38:29 +02:00
f5e48a306d
Bugfix: support material and brim didn't work correctly. Includes unit test. #1074
2013-03-30 00:21:09 +01:00
Vojtech Bubnik