132a67edb2
Wipe tower changes to reduce wiping volumes where appropriate
2018-05-24 17:24:37 +02:00
91e847cb76
Yet another fix for https://github.com/prusa3d/Slic3r/issues/607 .
...
Use EPSILON to match two layers by their floating point Z height.
2017-12-13 10:32:25 +01:00
61e6f23ed2
Fix of
...
"Multimaterial printer switches filament at the wrong time during a print"
https://github.com/prusa3d/Slic3r/issues/607
There was a single layer between the raft top and the object first layer
missing on the wipe tower, and after this missing layer all the tool
changes were shifted by one layer, meaning two color print had the colors
switched.
2017-12-11 17:19:55 +01:00
2c5304a520
Implemented an initial priming line for a single-material print
...
on a Prusa Multi-Material printer.
2017-09-04 13:51:05 +02:00
b610866d77
Implemented priming of all the filaments of the Prusa Multi Material.
2017-09-01 17:30:18 +02:00
434f538919
Fix of soluble interface / non-soluble support:
...
The non-soluble support with "don't care" extruder will preferably
be printed with a non-soluble extruder, if possible without a tool change.
2017-07-07 13:22:00 +02:00
881a5c531b
Fix of the last commits:
...
1) FLT_MAX replaced with limits,
2) apply_config is called by the test case harness to update layer height profile.
2017-06-09 14:24:00 +02:00
89dcd3e8b1
Implemented raft support for the wipe tower
...
https://github.com/prusa3d/Slic3r/issues/324
Implemented a correct layer height preview for the wipe tower layers,
if the wipe tower layer height is not constant due to the application
of raft.
2017-06-08 16:58:29 +02:00
2178180a19
Wipe tower: Wipe less than usual amount of material if the wipe
...
is followed by the final sparse zig-zag tower section.
2017-05-30 10:51:38 +02:00
e000b22578
Implemented wipe tower print path preview.
2017-05-25 22:27:53 +02:00
ca590cb559
Refactored ToolOrdering to a class,
...
layers with print_z closer than EPSILON are merged and printed together.
2017-05-23 15:00:01 +02:00
70db88dd90
Improved retract handling on bowden extruders:
...
Separated deretract speed from a retract speed,
allowed a partial retract before wipe.
2017-05-19 19:24:21 +02:00
fdff937cb2
Fixed tool ordering for sequential prints.
2017-05-17 19:25:36 +02:00
7b6c9b3b3c
Fixes of the Prusa Multi Material wipe tower.
2017-05-17 16:45:37 +02:00
21be680ac2
Fixes of G-code multi-tool ordering.
2017-05-16 15:30:03 +02:00
c22b6edeeb
Initial integration of the Prusa MultiMatrial Wipe Tower.
2017-05-16 13:45:28 +02:00
Lukas Matena