665bc9e960
Hollowing: allow to place drain holes on the inner surface of a hollowed cavity
...
Drain holes are not allowed to be placed on its own inner surface. This was recently (0e3ebb3
2020-02-06 17:58:26 +01:00
3c23917e9e
SLA gizmos: make sure that the clipping plane is properly reset to zero when the shown meshes are exchanged
2020-02-06 14:46:02 +01:00
b0588abdd2
Invalidate background process when HollowingGizmo modifies settings
...
Also, assertion fail in debug mode for m_selection
2020-02-05 14:21:06 +01:00
617912ecc1
Fixed a crash on deleting object with SLA gizmo active
...
Rephrased text informing about hidden objects in both SLA gizmos
2020-02-04 15:03:10 +01:00
0e3ebb3e07
Hollowing gizmo: Invalidate drilled mesh in case a hole is manipulated
...
This way the holes cannot be placed on its own walls
Downside is that AABB trees have to be recalculated
2020-02-04 15:03:10 +01:00
58b5e75a9c
SlaSupports gizmo - show holes position even when user did not Preview the drilled mesh
2020-02-04 15:03:10 +01:00
87daba9288
Movements and rotations by keyboard indipendent from gizmos:
...
Left arrow = Decrease X by 1mm
Right arrow = Increase X by 1mm
Up arrow = Decrease Y by 1mm
Down arrow = Increase Y by 1mm
PgUp = Rotate 45 degrees CCW
PgDown = Rotate 45 degrees CW
2020-02-04 11:42:58 +01:00
648060f4ec
Smoother movements/rotations when using arrow keys
2020-02-04 10:31:50 +01:00
3371fa42da
Follow-up of e042cab8fa -> Avoid polluting undo/redo stack
2020-02-04 09:32:09 +01:00
e042cab8fa
Follow-up of 8453c88482, c09091c407 and 9d55121695 -> Use key down event in place of key up event
2020-02-03 16:05:13 +01:00
227cc4dc33
Fixed conflicts after merge
...
slaposHollowing was divided into slaposHollowing and slaposDrillHoles on master
This commit takes this into account on the code that was merged from lm_drilling_backend_rebased
2020-02-03 15:42:54 +01:00
a1d4dab999
Merge branch 'master' into lm_drilling_backend_rebased
2020-02-03 15:20:16 +01:00
d407fda433
Hollowing gizmo - controls layout improvements
2020-02-03 15:17:18 +01:00
79da3a95e1
Clipping plane is now common for Hollowing and SLA supports gizmos
2020-02-03 15:17:18 +01:00
8453c88482
Cut Gizmo -> added movements using arrow keys:
...
Up arrow = increase Z by 1mm
Down arrow = decrease Z by 1mm
2020-02-03 15:00:49 +01:00
c09091c407
Rotate Gizmo -> added rotations using arrow keys:
...
Left arrow = 90 degrees around Z axis CCW
Right arrow = 90 degrees around Z axis CW
Up arrow = 45 degrees around Z axis CCW
Down arrow = 45 degrees around Z axis CW
2020-02-03 14:51:25 +01:00
9d55121695
Move Gizmo -> added movements using arrow keys:
...
Left arrow = decrease X by 1mm
Right arrow = increase X by 1mm
Up arrow = increase Y by 1mm
Down arrow = decrease Y by 1mm
2020-02-03 14:39:16 +01:00
a6f7fc93f4
Gizmo updates - forget everything about the loaded mesh when an object is deselected
2020-01-30 15:26:23 +01:00
4f43c6d3f8
SlaSupports gizmo - most of updating now assumes that common data struct is updated properly
2020-01-30 14:31:52 +01:00
08dcbd0271
Hollowing gizmo - most of updating now assumes that common data struct is updated properly
2020-01-30 14:31:39 +01:00
b41c6d7d64
Refuse to drill a broken mesh
...
Hole parameters defaults and limits changed a bit
2020-01-29 14:07:12 +01:00
3f73261fdb
Fixed transformation of the hollowed mesh to be used at frontend
...
Common gizmos data update is called from GLGizmoManager
2020-01-29 10:08:26 +01:00
46fdce1169
SLA gizmos can now fetch hollowed and drilled mesh from the backend
2020-01-29 10:08:26 +01:00
1c0aedbbe5
Hollowing gizmo can now trigger the backend calculation
2020-01-24 10:53:40 +01:00
63b0eec5a9
Merge branch 'master' into lm_tm_hollowing
2020-01-21 13:00:07 +01:00
07d6fd8f7e
Platter->Plater
2020-01-20 11:16:49 -05:00
b368f8ff24
Fixed conflicts after merge with master
2020-01-17 14:58:19 +01:00
dad09c737c
ENABLE_GIZMO_ICONS_NON_ACTIVABLE_STATE set as default
2020-01-17 10:34:32 +01:00
d9786f2bcd
Fixed SLA gizmos picking problem - hollowed mesh was not rendered for picking
2020-01-16 13:18:43 +01:00
822f9ff4a6
Fixed issues in SLA gizmos related to showing/hiding of the model/support structures
2020-01-16 13:18:43 +01:00
902d3bb904
Fixed loading of hole_height when a hole is selected (hollowing gizmo)
2020-01-16 13:18:43 +01:00
6e8bdb2c86
Fixed update of clipping plane when a gizmo was turned off
2020-01-16 13:18:43 +01:00
8c8256c6a2
Fixed diameter/radius mismatch in gizmo UI
2020-01-16 13:18:43 +01:00
a3f3c868eb
Removed needless calls to instance_bounding_box
2020-01-16 13:18:43 +01:00
3f2ccf08d2
3Dconnexion devices translation linearly dependent on zoom
2020-01-16 10:17:07 +01:00
d0d73e6109
Hollowing config values contain min/max values, these are respected when setting through the gizmo
...
Rendering and hole transformation fixes (still WIP, though)
2020-01-14 10:33:10 +01:00
e9d340c87f
Fixed transformations of the hollowed GLVolume
2020-01-09 14:09:26 +01:00
ff065aa9ba
Switched order of hollowing and support points gizmos
2020-01-09 10:01:21 +01:00
5a63b9a6a0
Follow-up of 5b2e2fe7b3 -> Fixed uv mapping on gizmobar
2020-01-08 10:04:39 +01:00
5b2e2fe7b3
Fixed artifacts on toolbar and gizmobar icons showing up when changing screen or toolbar scale factors
2020-01-07 12:40:03 +01:00
6a870ef8bb
Fixed incorrect z-shift when showing hollowed object
2020-01-06 16:02:55 +01:00
4d182a5748
Fixed scaling of the holes and instance showing/hiding
2019-12-20 11:33:14 +01:00
b3f15b1c98
Merge branch 'master' into lm_tm_hollowing
2019-12-20 10:33:53 +01:00
d1f86e0a80
SLA supports gizmo now uses hollowed mesh when available
...
Bugfix: SLA support tree is is now given the hollowed mesh, not the original
Added ImGui separators and change background alpha in hollowing gizmo dialog (to match the other gizmos)
2019-12-20 10:17:59 +01:00
57cf3d17e2
First steps on SLA and Hollowing gizmo data sharing
2019-12-17 15:57:24 +01:00
2cb30f3641
First prototype of CGAL hole-drilling
2019-12-13 13:42:10 +01:00
f2b8607d11
Fixed positioning of gizmos' imgui dialogs
2019-12-12 13:38:08 +01:00
537260494d
Merge branch 'master' into lm_tm_hollowing
2019-12-12 11:37:33 +01:00
d6f5ed9ad0
Refactoring in GLGizmosManager to simplify code
2019-12-12 11:11:11 +01:00
135660decf
SLA gizmos fix: clipping of points/holes always used coords from the first instance
...
Few warnings fixed
2019-12-12 10:40:28 +01:00
Lukas Matena