b38cc2c244
Merge branch 'master' into xsdata
...
Conflicts:
lib/Slic3r.pm
lib/Slic3r/ExPolygon.pm
lib/Slic3r/Fill.pm
lib/Slic3r/Fill/Rectilinear.pm
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Geometry/Clipper.pm
lib/Slic3r/Layer/Region.pm
lib/Slic3r/Print.pm
lib/Slic3r/Print/Object.pm
lib/Slic3r/TriangleMesh.pm
t/shells.t
xs/MANIFEST
2013-08-08 02:10:34 +02:00
e29aca3553
Reapply correct optimization for simplifiying fill_surfaces before performing the offset. #1325
2013-07-20 12:22:41 +02:00
c7b6818ccf
Ported offset() and offset2()
2013-07-17 00:48:29 +02:00
f7ada2b5db
Ported make_clockwise() and make_counter_clockwise()
2013-07-16 21:09:29 +02:00
fe061b19ad
Ported Polygon->is_counter_clockwise() and rearranged code in .cpp files
2013-07-16 21:04:14 +02:00
9458c7db97
Fix integration of XS containers
2013-07-16 17:13:01 +02:00
9b582a11ff
Adopt XS containers everywhere (incomplete work)
2013-07-16 09:49:34 +02:00
ab6b3d41a7
XS interface completed, including new Line class
2013-07-15 22:57:22 +02:00
9af2a1c007
Use XS Point everywhere
2013-07-15 20:31:43 +02:00
d0701cdcd4
Implemented Slic3r::ExtrusionLoop
2013-07-15 16:21:09 +02:00
f612d4c64e
Ported ExtrusionPath to XS. Failing test for Surface
2013-07-15 12:14:22 +02:00
5c7b447f07
Ensure there's no numerical error when searching for concave points
2013-06-23 00:21:19 +02:00
64a21276e3
Add regression test for concave starting points. #135
2013-06-22 15:22:58 +02:00
aba7641fe4
Avoid starting loops on convex vertices and/or overhangs. #296 #135
2013-06-21 19:43:15 +02:00
4474595629
Removed useless code
2013-06-20 19:21:35 +02:00
b414c50b68
Optimization: use Boost.Geometry for point in polygon
2013-06-20 18:48:11 +02:00
ac4a0bcdd8
Refactoring: use Slic3r::Geometry::BoundingBox objects everywhere
2013-06-16 12:21:25 +02:00
bc9ff47d3f
New module to output SVG vertical sections of extrusion paths with real width and height. The commit includes a bugfix to the Polyline->grow() method and some simplification in the Line class which is now child of Polyline
2013-04-27 15:02:13 +02:00
04d2231901
Bugfix: is_printable() wasn't discarding narrow ring-shaped top/bottom surfaces because it was only considering the contour. This caused extra shell material even in hollow prints. #1049
2013-03-30 11:22:12 +01:00
2f046799f2
Removed offset() method from Slic3r::Polygon because it only works with ccw polygons
2013-03-26 14:03:24 +01:00
4c41f6c462
Safer safety_offset() for ExPolygons
2013-03-26 13:57:37 +01:00
0f5064dd32
Untested fix for incomplete honeycomb support material. #1032
2013-03-16 21:10:12 +01:00
33b40eda18
Always fix self-intersecting polygons that Douglas-Peucker might return
2013-03-16 18:42:56 +01:00
fa41e15c68
Fixed regression causing thin walls to be processed twice, thus producing overlapping straight paths and zigzag. #1035
2013-03-09 17:07:11 +01:00
36d24ccb0b
Infill refactoring and cleanup complete
2013-03-07 15:47:32 +01:00
8ce7b13db5
Fixed regression in is_printable() - needs unit test
2013-02-26 20:54:40 +01:00
b9c84490b8
Get rid of most calls to $Slic3r::flow
2013-02-19 12:37:26 +01:00
7d08796b0a
Remove sporadic duplicate useless lines. #772
2013-02-04 14:27:23 +01:00
48e00a4c40
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
lib/Slic3r/GCode.pm
lib/Slic3r/GUI/Plater.pm
lib/Slic3r/Print.pm
lib/Slic3r/SVG.pm
2013-01-12 19:00:18 +01:00
f001374c6e
New implementation of the little inwards move before leaving a loop. #186
2012-12-05 11:31:35 +01:00
e21c806ee9
New wkt() method for debugging
2012-11-06 20:31:50 +01:00
68e1edab80
Require Math::Clipper 1.14 and increase scale factor for offset(). #720
2012-11-05 00:17:46 +01:00
554d10c854
Only put ExtrusionPath objects in ExtrusionPath::Collection (no ExtrusionLoop objects)
2012-10-31 19:08:29 +01:00
cec7bf815c
Get rid of the ExtrusionLoop objects in concentric filler
2012-10-30 15:29:13 +01:00
c95cd5ac38
Merge branch 'master' into avoid-crossing-perimeters
2012-09-21 15:36:45 +02:00
e40f32995f
Finish GUI decoupling
2012-09-21 15:04:33 +02:00
cc8d8bd26f
Merge branch 'master' into avoid-crossing-perimeters
...
Conflicts:
README.markdown
lib/Slic3r/Config.pm
lib/Slic3r/GCode.pm
lib/Slic3r/Print.pm
slic3r.pl
2012-09-12 16:04:16 +02:00
896641cb7e
Fixed regression causing some bridges not to be detected correctly. #629
2012-08-25 20:04:29 +02:00
0eadc5adba
Manual rebase of the avoid_crossing_perimeters feature
2012-08-23 15:42:58 +02:00
7e34244b05
Refactored configuration handling.
...
Slic3r::Config is now an object. Multiple partial config objects are used throughout the codebase as local repositories, then merged and serialized when necessary.
2012-07-27 21:16:11 +02:00
b11778a85f
polygon_lines returns array of Slic3r::Line objects so bless is redundant.
2012-07-01 23:14:04 +01:00
4296ea6da1
Slic3r::Polygon's boost_linestring method needs to close the contour.
...
This prevented Slic3r from detecting some bridge supporting edges
(basically, if that edge was the last one in the contour). This
addresses some of the bridge detection issues (#414 , #358 ).
2012-06-14 13:33:59 +02:00
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
efdf266df1
Removed useless Polygon constructor and some cleanup
2012-05-23 11:51:20 +02:00
5a78111efa
Options to set extruder clearance for sequential printing and graphical preview of collisions
2012-05-23 11:47:52 +02:00
8ba6405cc9
Bugfix: some nearly-thin walls were discarded. #261
2012-05-05 17:07:38 +02:00
96d5e513b8
Rename $Slic3r::resolution to $Slic3r::scaling_factor
2012-04-16 14:05:38 +02:00
cb182b8bc2
Honeycomb infill. #300
2012-04-16 11:55:14 +02:00
0afb5ad9dd
Bugfix: some holes were filled. #291
2012-04-02 11:40:12 +02:00
Alessandro Ranellucci