410279823c
New separate option to control the addition of automatic extra perimeters. Also, add none if perimeters are set to 0. #459
2012-06-23 17:10:30 +02:00
8fcf24a766
Merge pull request #467 from henrikbrixandersen/ratio-options
...
Two small ratio option improvements/bug fixes
2012-06-19 06:44:16 -07:00
4031cf26b4
- Add Slic3r::Config::get_raw() for getting the raw, uncalculated values.
...
- Use get_raw() for saving and displaying options in GUI
2012-06-19 15:32:56 +02:00
8d25e6490a
Set CLI option type to 'string' for all options allowing ratio inputs
2012-06-19 11:38:12 +02:00
b7d2860d5b
Allow negating bool cli options by using '--no-foo' or '--nofoo'
2012-06-18 23:39:53 +02:00
71c1c66985
Label and CLI option were wrong for top_solid_infill_speed. #425
2012-06-11 13:45:03 +02:00
3e94add8a8
Pass config options as environment variables to post-processing scripts
2012-06-09 17:52:03 +02:00
caa32ab282
Fixed regression causing flow errors when using legacy config files. #421
2012-06-07 11:24:45 +02:00
709c444976
Fixed fatal error when using --first-layer-extrusion-width
2012-06-07 11:17:35 +02:00
fbfbfac2b6
New --top-solid-infill-speed option. Also, --solid-infill-speed and --small-perimeter-speed can be expressed as ratios too. #174 #151
2012-06-06 19:59:20 +02:00
c7af74884f
Legacy config files were not correctly supported
2012-06-06 18:47:11 +02:00
82dd3c7a3e
New --perimeters-extrusion-width and --infill-extrusion-width options. #302
2012-06-06 18:05:03 +02:00
8a031fe501
New --first-layer-extrusion-width option. #385
2012-06-06 17:29:12 +02:00
16b774603c
Accept either absolute or relative values for --first-layer-height. #151
2012-06-06 16:11:38 +02:00
896c7e952e
Renamed bottom_layer_speed to first_layer_speed for consistency
2012-06-06 15:52:21 +02:00
4a188f8566
Support for legacy config files containing bottom_layer_speed_ratio. #151
2012-06-06 15:48:14 +02:00
91ffb74429
Accept either absolute or relative values for --bottom-layer-speed. #151
2012-06-06 15:43:54 +02:00
aedb6cc35f
Accept both relative and absolute extrusion width values. #151
2012-06-06 15:23:34 +02:00
9da034a042
fixes #409
2012-06-05 10:55:02 +02:00
5a78111efa
Options to set extruder clearance for sequential printing and graphical preview of collisions
2012-05-23 11:47:52 +02:00
ce6b4aeaee
New option to print each object completely before moving onto next one (watch out for extruder collisions, Slic3r isn't doing any check since it doesn't know its shape)
2012-05-20 20:08:59 +02:00
67a076b360
Removing warnings here and there
2012-05-20 17:21:31 +02:00
159ca3f65e
Accept --threads 1 on non-threaded perls too
2012-05-19 23:18:29 +02:00
fa4f2c8b97
New option to randomize starting points across layers
2012-05-19 22:36:29 +02:00
8fe5d11624
Set number of threads from GUI and save it in config files. #154
2012-05-19 15:08:32 +02:00
7ee08be0b8
Allow [version], [timestamp], [year], [month], [day], [hour], [minute], [second] in filenames. #318
2012-05-01 15:02:33 +02:00
d03925a18d
New GUI with plating facilities
2012-04-30 14:56:01 +02:00
96d5e513b8
Rename $Slic3r::resolution to $Slic3r::scaling_factor
2012-04-16 14:05:38 +02:00
0d910dec84
Don't require --duplicate-distance to be positive anymore
2012-04-16 11:58:01 +02:00
cb182b8bc2
Honeycomb infill. #300
2012-04-16 11:55:14 +02:00
1c6469fc25
Allow to use x as a separator for --print-center, --bed-size, --duplicate-grid
2012-04-11 18:18:01 +02:00
134595fc99
Validation for --duplicate-grid and --bed-size
2012-04-11 17:52:06 +02:00
e5abb0b9df
Enable/disable duplication controls
2012-04-11 17:40:10 +02:00
e58ed195fd
New --bed-size option
2012-04-11 16:30:58 +02:00
4ae551a424
Ditch --duplicate-x and --duplicate-y, add --duplicate-grid
2012-04-11 15:58:09 +02:00
63ff01764c
Document --threads, -j and throw an error when it's used on a non-threaded perl
2012-04-10 16:26:56 +02:00
82a16ed8ee
Merge branch 'triffid-duplicate'
2012-04-09 15:14:40 +02:00
f2edfd1a76
initial implementation of algorithm for #249
...
fix typo that put things in the wrong position
use int() builtin instead of POSIX::floor()
fix typo
use alternate method of creating local routines
remove aliases for new duplicate option
use coderefs for linear interpolate function, make binary insertion sort inline
add \n at end of die message regarding too many objects for print area
fix case where no duplication is done
fix whitespace according to slic3r coding style
assume 200x200 bed area if center is 0,0
Some cleanup to the autoarrange duplication logic
2012-04-09 15:14:07 +02:00
a800b97fdd
Bugfix: no-extrusion was ignored
2012-04-08 21:27:38 +02:00
d538382669
Use correct spelling for G-code.
2012-03-26 22:33:43 +02:00
5bd16ffed6
Allow decimal values for skirt/duplicate distances and speeds. #283
2012-03-26 15:20:59 +02:00
1a06e35687
New option to specify G-code to be used at layer change. #279
2012-03-26 12:14:15 +02:00
bf964b5273
Allow perimeters = 0. #282
2012-03-26 11:32:59 +02:00
0f5e2e3076
Throw an error if a user wants to print a 0mm layer
2012-03-11 16:58:15 +01:00
d0807aa807
Allow to use config options in start/end G-code
2012-03-03 23:29:08 +01:00
7892a84408
Refactoring and integrations to the bed temperature handling
2012-03-03 23:14:40 +01:00
35e7877437
bed temperature handling. TODO: gui elements
2012-03-03 23:08:50 +01:00
8566b4f910
Separate the Slice button a bit
2012-03-03 22:53:12 +01:00
5c79024215
Revert "Made the UI look quite a bit nicer (OS X 10.7 tested)."
...
This reverts commit 266f7799dd
2012-03-03 22:50:08 +01:00
06c22c9db3
New --fan-always-on option. #241 #110
2012-03-03 22:21:30 +01:00
Alessandro Ranellucci