483a658144
Method ExtrusionEntity::polygons_covered() and derived were split
...
into polygons_covered_by_width() and polygons_covered_by_spacing().
Bugfix of ExtrusionLoop::split_at(const Point &point),
where the split ExtrusionPaths were not initialised correctly.
2016-11-04 00:10:35 +01:00
7b6b609df1
ExtrusionEntity and derived classes: Documented, short methods made
...
inline for efficiency and readability, grow() renamed to polygons_covered().
2016-11-03 10:24:32 +01:00
95ede7c4b8
Rewrote Fill2.pm to C++, deleted Perl infills for good.
...
Removed dependency on Perl Math::PlanePath module.
Fixed compilation with Visual Studio and SLIC3R_DEBUG: Visual Studio older than 2015 does not support the prinf type specifier %zu. Use %Iu instead.
C++11 move semantics enabled.
2016-11-02 10:47:00 +01:00
4e66ed81d2
Fixed the fill density for rectilinear, triangular and cubic infills.
...
Initial implementation of the "infill link maximum distance" feature.
Parts of the perimeter connecting two infill lines will be dropped,
if longer than a given threshold.
2016-10-27 17:03:57 +02:00
4524ecf66b
by alexrj: Always convert strings to UTF-8 before passing them to XS
2016-10-24 14:08:22 +02:00
1fb57e439e
Defined the +-* operators on Pointf.
...
Removed the deprecated VibrationLimit feature.
Added triangle infill.
The Prusa3D fork of Slic3r has been marked as "Slic3r Prusa Edition"
with menus pointing to the prusa3d/slic3r github release page
and Prusa3D drivers downloads page.
2016-10-21 16:53:42 +02:00
15d3e94a66
Unified the creation of paths of debugging output files
...
pointing to a predefined output directory.
2016-10-21 10:18:01 +02:00
f788f50b5a
Disabled asserts in the release build (-DNDEBUG).
...
Added a safe variant of offset(const Slic3r::ExPolygon...), which offsets each loop separately.
New functions "remove_sticks" to remove zero area parts of polygons.
New functions "remove_small" and "remove_degenerate" for polygon clean up.
Extended the C++ supports, those are not finalized yet though.
2016-10-20 13:04:23 +02:00
53907a9cfe
Fix of a crash when setting a viewport over an empty platter.
...
Exported bounding box 'empty' method to perl.
2016-10-18 16:44:05 +02:00
7d7f093120
C++ supports sketched, but not finalized yet. Slic3r is still using
...
the old Perl supports, but this time with the C++ fillers.
2016-10-16 16:30:56 +02:00
3a81e6bee4
Bugfix of bottom bridges. If close regions shall be closed by bridges,
...
these regions are grown to anchor the bridge lines to the bottom surface.
The grown regions may overlap. In that case the regions are now merged
before the bridging direction is calculated for the merged region.
2016-09-30 15:23:18 +02:00
403329db49
Misc bugfixes.
2016-09-26 13:58:47 +02:00
790b640521
Visualization of fill surfaces.
2016-09-26 13:56:24 +02:00
e0d1aa8a1a
Collect the perimeter surfaces when generating perimeters.
...
The perimeter surfaces are later used for performing infill
below overhangs and to maintan configured vertical wall thickness
at sloping surfaces.
2016-09-26 13:44:23 +02:00
620c6c7378
Ported from the playground branch. Various documentation and optimization.
2016-09-13 13:30:00 +02:00
f518e0675c
Initial commit of the new Pressure Equalizer, the EdgeGrid
...
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
2016-09-12 16:25:15 +02:00
9fcc8fe9ae
Meged with release_candidate_1_3
2016-09-12 11:29:39 +02:00
9e8022f6f6
More refactoring to medial axis and gap fill, more robust
2016-05-20 17:03:57 +02:00
d022493297
Merge remote-tracking branch 'upstream/master'
2016-05-03 22:05:31 +02:00
f767ce816b
Optimized and improved rectilinear fill.
2016-04-13 20:45:44 +02:00
3d73fbf5fd
Use float for elapsed_time
...
When accumulating elapsed_time from many moves that take less than 1
second, elapsed_time does not get incremented because (unsigned int)0.9
= 0.
2016-04-13 01:13:42 +08:00
ed83ff37f8
Simulation of extrusion in a plane, useful for finding out under / over-extruions.
2016-04-11 17:10:13 +02:00
9716ee8eca
Interface to a filler, ported from Perl to C++.
2016-04-11 17:09:15 +02:00
7da68c91a5
Vojtech likes to use Sublime on Windows to get the wheels rolling.
2016-04-11 17:05:58 +02:00
660b56acb5
Fixed type error
2016-03-26 12:21:54 +01:00
7c8b71012c
Force the 'nearest' strategy for starting skirt loops
2015-12-21 15:02:39 +01:00
934bd43e35
More refactoring on Config XS bindings
2015-12-16 12:58:06 +01:00
3c862836f2
Refactored the Config XS bindings
2015-12-16 12:33:19 +01:00
e2f2761a00
One more fix for compilation
2015-12-08 11:07:45 +01:00
4913e90e10
Remove any Perl related code from libslic3r
2015-12-08 00:39:54 +01:00
3fac8cd77e
Large refactoring of the Config classes
2015-12-07 19:39:49 +01:00
7e1fac8f76
Separate libslic3r code from slic3r application code
2015-12-06 12:54:01 +01:00
e2b203ba8d
Disable screensaver while projecting (untested on Windows)
2015-12-04 21:25:45 +01:00
7523550066
Try to fix compilation on older Perls
2015-12-02 19:57:03 +01:00
1bebe6097b
Make test happy
2015-12-02 19:39:16 +01:00
4f8a18bbad
Ported Layer::maker_perimeters() to XS
2015-12-02 19:32:57 +01:00
3a9cf91f83
Ported a couple more methods to XS
2015-12-02 18:29:33 +01:00
ed75219215
Ported mode Model methods to XS
2015-12-02 18:06:18 +01:00
dfce3a3138
Ported _arrange() and arrange_object() to XS
2015-12-01 21:51:16 +01:00
9febb10bd7
Smoother manual control movements
2015-11-08 10:20:47 +01:00
9a8724cdd0
More compilation changes for Win32
2015-11-06 11:51:24 +01:00
9f9b5afedb
Merge branch 'master' into sender
2015-11-05 11:04:01 +01:00
61f0a9e4da
Replace the flip word with mirror. #3060
2015-11-04 23:11:30 +01:00
f8d2c69713
Fixed compilation warnings and a potential bug in MotionPlanner, as reported in #3054
2015-11-04 20:50:32 +01:00
9ee6829ebc
Implemented connection timeout in C++
2015-11-02 20:36:36 +01:00
fc1a7471cf
Several improvements to the print job queue
2015-11-02 01:18:05 +01:00
9b21ac877a
Merge branch 'master' into sender
...
Conflicts:
Build.PL
lib/Slic3r.pm
xs/MANIFEST
xs/src/libslic3r/PrintConfig.hpp
2015-11-01 19:12:13 +01:00
9fcec10737
Finished porting LayerRegion to C++
2015-10-26 23:24:46 +01:00
6ac79e3ed6
Ported make_perimeters() to C++
2015-07-23 16:27:21 +02:00
b4515cf695
Finished porting PerimeterGenerator to C++
2015-07-23 15:53:02 +02:00
bubnikv