73aae07e74
842, 847 slightly enlarge a clip polygon to counteract integer truncation
...
Geomery in referenced issues triggered Clipper problems, but also
pointed to a situation where integer truncation (as coordinates pass
into Clipper) might be shrinking a clip polygon in a way that leaves
degenerate or unwanted thin clip results. Growing the clip polygon by 2
is expected to overcome any issues caused by truncation of floats.
2013-01-11 10:15:42 -08:00
141a8d3989
Bugfix: some holes being closed incorrectly. #858
2012-12-30 17:57:30 +01:00
6e6bc74636
Added failing test case for troubleshooting unexpected filled holes. #858
2012-12-30 16:27:20 +01:00
0da71dbdfa
Fix regression causing wrong number of solid shells when using fill_density = 0 (includes regression test)
2012-12-23 20:20:17 +01:00
15f07197d8
Don't store ->surfaces anymore. Save memory, save time
2012-12-22 23:57:39 +01:00
b70404bb23
Disable gap filling if gap fill speed is set to zero
2012-12-17 19:55:25 +01:00
283809f5c2
No need for a role to identify small perimeters
2012-12-05 10:47:41 +01:00
8ae96a8868
Only apply vibration limit to gaps fill while it's not very mature to work with long segments
2012-11-21 19:27:38 +01:00
cd892fdce8
Connect zigzag gaps fill paths to benefit from simplification
2012-11-19 18:57:42 +01:00
c99ff0cfe2
Apply Douglas-Peucker to all paths before generating G-code
2012-11-18 17:38:08 +01:00
a1a12ffe8e
Allow setting top-solid-layers and bottom-solid-layers to 0 independently
2012-11-16 12:37:47 +01:00
b625c3b2b2
Simplify gaps fills to avoid some shaking
2012-11-16 10:47:42 +01:00
68e1edab80
Require Math::Clipper 1.14 and increase scale factor for offset(). #720
2012-11-05 00:17:46 +01:00
93a8391e18
Alternate gaps fill direction
2012-11-01 11:53:18 +01:00
37c0b45187
Detect gaps even after the desired number of perimeters has been generated
2012-11-01 11:51:52 +01:00
cb4ede7f9e
Do not pass the Print object to SVG::output anymore
2012-11-01 11:34:53 +01:00
554d10c854
Only put ExtrusionPath objects in ExtrusionPath::Collection (no ExtrusionLoop objects)
2012-10-31 19:08:29 +01:00
44d91774a6
Get rid of useless Slic3r::Fill instances
2012-10-30 15:38:17 +01:00
1ecadc10fb
Fixed regression causing one perimeter to be generated even when perimeters where set to 0. #759
2012-10-28 19:27:54 +01:00
f35cdef2aa
Renamed ExtrusionPath->depth_layers to height
2012-10-28 14:22:51 +01:00
f9b6caaecb
Bugfix, last commit was incomplete
2012-10-28 12:22:30 +01:00
a0fe93e8cf
Bugfix: sometimes first layer extrusion width was not applied
2012-10-28 10:28:40 +01:00
49916b6178
Revert 2bcac88683 by setting the scale factor manually to 1. #720
2012-10-27 22:09:22 +02:00
f9e20db156
Update t/dynamic.t
2012-10-27 21:20:32 +02:00
cee3864fc9
Independently set number of top/bottom solid layers. #676
2012-10-25 12:21:04 +02:00
f0d2b0e5ea
Avoid overlapping regions (thanks Mike Sheldrake!). #726
2012-10-24 16:46:40 +02:00
1c50c8a401
Merge branch 'dynamic-flow'
2012-10-24 16:19:13 +02:00
6beaf5e597
New faster algorithm for filling gaps, while we work on a new medial axis implementation
2012-10-24 16:17:09 +02:00
1445820673
External perimeter first on bottom layer when brim is enabled. #761
2012-10-24 12:04:44 +02:00
19e77a28a1
Merge branch 'master' into dynamic-flow
2012-10-24 10:55:57 +02:00
b92642459f
Merge branch 'master' into dynamic-flow
...
Conflicts:
lib/Slic3r/Flow.pm
lib/Slic3r/Layer.pm
2012-10-04 15:23:19 +02:00
2bcac88683
Increase scale factor for Clipper::offset
...
A default scale of 1 was being calculated most of the time. That's too
low to avoid artifacts from offsetting concave curves. Setting scale to
a default of 100000 eliminates artifacts in the test cases in issues
#700 , #702 and #703 . There is a risk of large point proliferation with
this scale in combination with the JT_ROUND option, but in the four
places where that option is used, scale is already explicitly set to a
safer low value.
2012-09-27 05:50:54 -07:00
bbe0a45b58
Optimization: cache scaled flow width and spacing
2012-09-23 03:03:08 +02:00
ec0d3987db
Rename materials to regions
2012-09-23 02:52:31 +02:00
e696764af8
Assign extruders and flows to materials
2012-09-23 02:40:25 +02:00
e2ab340edb
Fix positioning and other things
2012-09-22 21:03:57 +02:00
d488afd243
More work (breaks centering and internal surfaces detection)
2012-09-22 19:38:25 +02:00
02356fd613
Large refactoring to allow processing multimaterial files
2012-09-22 19:04:36 +02:00
Mike Sheldrake