c5037540e9
Warning hunt session.
2019-06-14 18:17:17 +02:00
343d2ea16d
Fixed update of the SLA back end object properties, leading to
...
the "disable supports" and "disable pad" flags being ignored
after the project was loaded.
2019-05-23 15:43:16 +02:00
07282eb24d
Fixed unit tests when run with range checks on std::vector
...
There was a bug in unit tests that led to generating the wipe tower with non-normalized preset.
This caused out-of-bounds access into max_layer_height vector in fill_wipe_tower_partitions.
The problem surfaced in https://github.com/prusa3d/PrusaSlicer/issues/2288 .
I quickly patched additional normalization of the preset to prevent this from happening.
Also, an assert in the same function turned out to trip on one of the tests.
This one was commented out for now and will (hopefully) be looked into later.
Function Print::apply_config was renamed to apply_config_perl_tests_only so everyone
sees its current purpose and does not mistake it for the more important Print::apply.
2019-05-22 16:48:20 +02:00
04397c7948
Changed the G-code export and send to OctoPrint GUI code
...
to store the G-code next to the project file if it exists,
and to process the project name with the PlaceholderParser.
2019-05-17 16:27:00 +02:00
92ba75ed75
Fixed localization of the "Machine Limits" parameters.
...
Fixed localization of some other parameters (templating is not supported
inside the PrintConfig.cpp as these strings are translated not inside
PrintConfig.cpp, but by the calling GUI code).
Fixed localization of SLA status bar.
2019-05-09 14:15:56 +02:00
806dc34421
removing some commented out garbage
2019-05-07 09:56:53 +02:00
a7d57de6f3
Fix for possible clash with old correction vectors in config
2019-04-29 17:07:55 +02:00
cd9a77fed6
Remove back offset from the print statistic calculation.
2019-04-29 16:42:22 +02:00
3eecf54d9c
Fixing large memory reservation in the SLA model slicing step.
2019-04-26 11:33:33 +02:00
afbe0d9e60
Further optimizations for SLA memory usage.
2019-04-25 18:48:31 +02:00
ca50d1b55a
Memory optimization of SLA export,
...
logging of memory consumption during SLA slicing (just on Windows as of now).
2019-04-25 18:03:17 +02:00
63a0d1aeee
Added comments to the gettext dictionaries generated by the xgettext tool.
...
The prefix to be searched for in the source code comments is TRN
2019-04-18 10:13:56 +02:00
bbdc6a7881
Fix for incomplete validation condition on the allowable elevation.
2019-04-17 10:08:54 +02:00
f33e9bf609
TriangleMeshSlicer is now initialized by const-pointer to the mesh, responsibility for calling require_shared_vertices is left to the caller
2019-04-16 09:04:04 +02:00
53861b2012
Removing separate X and Y relative correction.
2019-04-09 18:15:25 +02:00
c702ddc65d
Adding absolute correction (XY offset) and gamma correction parameters.
2019-04-09 13:42:32 +02:00
4904359399
Finished SLA print / material correction visualization.
2019-04-08 18:09:31 +02:00
0de084df8d
Merge remote-tracking branch 'remotes/origin/master' into tm_relative_correction
2019-04-08 14:00:27 +02:00
ca6a5af1dc
Fixed rotation of SLA instances in case a rotation in X or Y was applied
...
to the instances.
2019-04-08 13:35:03 +02:00
2487bb8794
Remove unnecessary reversals of print polygons.
...
second take...
2019-04-05 17:04:55 +02:00
08b9d9a519
fix for hole disappearance
2019-04-05 16:24:23 +02:00
f554d02665
SLA: Invalidate all PrintObjects if the scaling correction changes.
...
Fixes a bug, where the sla_transofmation() function works with
the new scaling values for both old and new ModelObjects, therefore
no reslicing is triggered.
(untested)
2019-04-05 11:56:11 +02:00
f0d106e5f0
Added method for relative correction retrieval.
2019-04-04 10:52:14 +02:00
ecdd4b6e7a
Suggestion for Z offset correction
2019-04-03 18:23:29 +02:00
c6b5fe05e4
Scaling correction parameters in material and print conf.
...
Scaling is applied in sla_trafo but no effect unless set before model import.
2019-04-03 17:34:46 +02:00
32af3ff3c0
Remove unnecessary reversals of print polygons.
2019-04-03 10:29:27 +02:00
eeae1c0495
Fixed update of the SLAPrint back end after mirroring in a specific
...
case of mirroring around the X axis.
Fixed some asserts on visual studio due to access to empty std::vector
2019-04-02 18:04:23 +02:00
66fce6d46c
Add mirror correction to rasterized polygons.
2019-04-02 17:48:50 +02:00
dc64b4d971
Merge branch 'master' of https://github.com/prusa3d/Slic3r
2019-04-02 13:54:46 +02:00
086f11df98
Handling of left hand oriented coordinate systems:
...
is_left_handed() method on transformations and volumes
rendering of GLVolumes in left handed coordinate systems by glFrontFace(GL_CW);
SLA slicing on left hand oriented instances by flipping the mesh for SLAPrintObject in X.
rendering of the SLA cutting plane in left handed systems
resetting the SLA clipping planes on 3D preview invalidation
2019-04-02 13:47:49 +02:00
6a74564900
More accurate status proportions for SLA steps.
2019-04-02 11:19:52 +02:00
a3dcb6863e
Rethought sla status indication.
2019-04-02 10:54:14 +02:00
b8289c32b0
Fix for broken SLA status indication.
2019-04-01 16:10:15 +02:00
2baa651f1e
Fixing the broken rasterizer.
...
Paths and holes cannot be added separately.
2019-04-01 12:15:47 +02:00
4eb5d91a8f
Parallel loop for the statistics
2019-04-01 11:37:26 +02:00
6593421802
fix for statistics
2019-03-29 17:20:19 +01:00
b19d411738
It seems that stats are not broken after all.
2019-03-29 13:34:22 +01:00
440e54181b
Output raster seem ok, stats broken.
2019-03-27 18:37:50 +01:00
8fdff97eb7
Merging new steps integration
2019-03-27 11:05:51 +01:00
bc74761513
Integrating new step, removing old and unused steps.
2019-03-27 10:59:29 +01:00
95b0467c85
Reusing unified polygons from statistics
2019-03-26 18:51:27 +01:00
34094bf1b8
Adding new step for statistics
2019-03-26 18:04:04 +01:00
b064d9662f
Merge branch 'tm_slice_index_lyrh'
2019-03-26 17:47:27 +01:00
a0f18f9f7c
Add check for missing support points if supports are enabled.
2019-03-26 17:28:51 +01:00
4d8800bc8a
Fixing broken statistics.
2019-03-26 16:45:04 +01:00
6a41e45eeb
Reverting manual unification. It does not help performance.
2019-03-26 16:06:24 +01:00
1c6b25c053
Optimizing manual unification.
2019-03-26 15:05:57 +01:00
221a4836fd
Manual unification of print polygons.
...
With clipper not with the agg rasterizer, because they can be reused for the statistics.
2019-03-26 14:06:40 +01:00
9946a1c914
Fix for missing support polygons
2019-03-26 11:30:55 +01:00
57e28b53f2
Further refactor and simplification of slice index and print data.
2019-03-26 10:57:45 +01:00
tamasmeszaros