5f9cf7cfae
creality.ini: Move print head further up for low prints
...
With low prints, moving the print head up 70mm can still be too low
to be able to remove a print conveniently, so make sure the print head
is at least 60% up at the end of a print.
2021-01-25 17:22:13 +01:00
78354ee991
creality.ini: reduce prime line in start_gcode
...
reduce the prime line sufficiently so the Ender-2 no longer requires
a seperate start_gcode
the extrusion pressure is scaled proportionately, and reduced slightly,
as previously some nozzle ooze could happen between the prime line and
the skirt loops due to excessive pressure buildup
2021-01-24 13:09:22 +01:00
6bcdf0999c
creality.ini: universal end_gcode improvement
...
Replace hardcoded print presentation coordinate with print_bed_max[1],
where we move the print bed ~3/4 of the bed size across the y axis
at the end of the print.
2021-01-24 12:40:52 +01:00
4ede5c3959
creality.ini: Ender3 V2 naming consistency
2021-01-23 19:31:23 +01:00
6955e8ec08
creality.ini: raise Das Filament PLA bed temp
...
At 50C prints with sharper corners can be prone te warping if the
first layer height isn't quite optimal, and given that most Creality
printers don't have ABL, it often isn't.
So to optimize chances of getting good non-warped prints, we keep
all PLA bed temps at 60C for Creality printers.
2021-01-23 19:12:01 +01:00
231cd758c1
creality.ini: improve nonabl start_gcode
2021-01-23 19:09:29 +01:00
23ddb33237
1.2.2 Added Prusament PVB. Added 0.8mm nozzle profiles.
2021-01-08 10:57:41 +01:00
250ef23fd5
Updated 0.0.12 description
2021-01-08 09:44:09 +01:00
ecb85b2166
Added Ender 3-V2.
...
Based on https://github.com/prusa3d/PrusaSlicer/pull/5702 .
2021-01-08 09:42:01 +01:00
e8ab281cd0
TriLAB 0.0.6 - Added material TPU 93A
2021-01-06 20:35:37 +01:00
615356b69c
Ender3V2 thumbnail
2021-01-06 13:36:44 +01:00
ef5df08358
Initial FLSun bundle
...
https://github.com/prusa3d/PrusaSlicer/pull/5582
2021-01-03 20:59:36 +01:00
7edb79ed11
1.2.1 Updated firmware version for MK2.5 family printers
2020-12-28 15:03:05 +01:00
cd990cf5e0
Updated machine limits for Ender 5 and Ender 5 Pro
2020-12-28 14:36:57 +01:00
ea327c2d8c
Creality 0.0.10
...
Parameter consistency improvements. Enabled conservative elephant foot compensation.
2020-12-21 15:21:26 +01:00
f7d5032d0e
Bumped up version to 0.0.10
2020-12-21 15:20:29 +01:00
71cb5d1469
Creality.ini: default to Generic PLA, and move defaults to common printer section
2020-12-18 18:55:29 +01:00
33c36e6777
creality.ini: enable conservative elefant_foot_compensation
...
given the diversity of printers and bed types and a typical lack of
auto bed levelling, it will be impossible to get a good fit
for everyone by default.
A very conservative 0.1 for elefant_foot_compensation is unlikely
to cause overcompensation.
And I'd prefer to undercompensate as opposed to overcompensate
as a default.
2020-12-17 13:05:40 +01:00
1cf97b9c93
Creality.ini: improve parameter consistency
2020-12-17 13:04:39 +01:00
3f11877c8f
Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
2020-12-16 16:18:31 +01:00
e9ee88c397
Fixed end g-code for Ender 5
2020-12-13 09:25:59 +01:00
fe4f1b15c6
Anycubic 0.0.6
2020-12-08 22:16:13 +01:00
beabe2fe7e
Anycubic Kossel. Updated end g-code, before layer change g-code and output filename format.
2020-12-08 22:12:15 +01:00
fa8a72b2a3
Reduced max print height for Anycubic Predator to 445mm
2020-12-08 11:12:42 +01:00
b0485e3949
TriLAB 0.0.5 Removed obsolete host keys.
2020-12-05 11:29:16 +01:00
72a64c200b
Anycubic 0.0.5 Updated end g-code.
2020-12-05 11:23:07 +01:00
02a63e8de2
LulzBot 0.0.2 Removed obsolete host keys
2020-12-05 11:19:53 +01:00
4cffd490cc
BIBO 0.0.3 Removed obsolete host keys
2020-12-05 11:14:27 +01:00
92f7bdcf92
0.0.8 min_slic3r_version changed to 2.3.0-beta2
2020-12-05 10:21:13 +01:00
7cb7c5fd55
Changed layer_z to max_layer_z in end g-code.
2020-12-05 10:18:49 +01:00
6716416add
Removed redundant line
2020-12-05 09:58:51 +01:00
b95f9897b8
Updated end g-code. Added full_fan_speed_layer values.
2020-12-05 09:55:07 +01:00
ee088e219e
Creality 0.0.8
2020-12-05 09:53:05 +01:00
c4d97d3d9b
bumped up to 0.0.8
2020-12-05 09:51:38 +01:00
e3a0a8878a
creality.ini: add Extrudr PLA NX2 spool weight
2020-11-29 19:05:02 +01:00
0f03b74261
creality.ini: add 3DJAKE ecoPLA spool weight
2020-11-29 12:47:48 +01:00
f86dab9f36
creality.ini: slight end_gcode improvements
...
gcode order made more similar to prusa mini
2020-11-29 12:42:08 +01:00
6d27b0f5d0
1.2.0-beta0
2020-11-28 10:35:59 +01:00
4b2f9562ab
TriLAB - Added PLA, PETG profiles for 0.8 nozzle, update print materials
...
https://github.com/prusa3d/PrusaSlicer-settings/pull/110
2020-11-24 09:53:50 +01:00
ee20331ead
1.2.0-alpha0 added filament spool weight
2020-11-21 15:42:38 +01:00
9023f092ad
Creality 0.0.7 - updated start g-code
2020-11-21 10:24:54 +01:00
a2e763d4ca
Bumped up creality bundle version to 0.0.7
2020-11-21 10:22:57 +01:00
32345b9e75
creality.ini: make start_gcode robust for absolute_e
2020-11-18 18:40:20 +01:00
342f0738c2
revert version bump to 0.0.4 and remove accel settings for Predator
2020-11-15 00:51:17 +01:00
28c2277902
Equalize all accelerations to avoid filling gcode with M204 commands
2020-11-14 17:16:46 +01:00
2558a98636
fix spurious custom setting in Anycubic Predator profile
2020-11-14 12:27:20 +01:00
cd2b502c38
Updated Anycubic thumbnails.
2020-11-13 13:08:09 +01:00
2df97edcf5
Updated LulzBot thumbnails.
2020-11-12 19:20:23 +01:00
62a29237fc
Added filament profiles, adjusted temperatures, updated start g-code for some models.
2020-11-12 18:55:42 +01:00
0c78573f5c
Version changed to 0.0.6
2020-11-12 18:52:48 +01:00
Pascal de Bruijn