c6e112a060
Merge branch 'lm_tm_hollowing' into lm_hollow_gizmo
2019-11-22 12:04:54 +01:00
2c1d256b0c
EigenMesh3D raycaster should now be able to pick a correct intersection on the object or inside a hole
2019-11-22 11:14:38 +01:00
9dd18a8d6d
Started work on extending EigenMesh3D to account for possible drain holes when raycasting
2019-11-19 11:33:49 +01:00
7011c58faa
Merge branch 'master' into lm_tm_hollowing
2019-11-18 17:50:56 +01:00
bbb519ad0e
Fixed a typo in MeshUtils.hpp
2019-11-16 08:22:39 +01:00
b2a6a07d72
Make the .gcode and .sl1 thumbnails configurable through printer profile.
2019-11-15 17:33:31 +01:00
fe4b65e305
Improvement of the Elephant foot compensation:
...
Using a positive curvature estimate to control the strength
of the Elephant foot compensation shall work similarly to
the previous implementation while avoiding pinching off
tiny pieces from the contour.
2019-11-15 16:20:01 +01:00
8c377c6585
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2019-11-14 17:02:46 +01:00
dd59945098
Fix of a typo in KDTreeIndirect.
...
Improvement of the infill path planning.
Regression fix of Gyroid infill crashes.
Some unit tests for elephant foot and path planning.
2019-11-14 17:02:32 +01:00
88514eeb0e
Merge branch 'lm_low_wipe_tower'
2019-11-14 10:37:04 +01:00
53cdb8ef53
No sparse layers option marked as EXPERIMENTAL
2019-11-14 10:05:02 +01:00
673549d608
Merge branch 'tm_openvdb_integration' into lm_tm_hollowing
2019-11-13 16:07:40 +01:00
d4d037792d
Holes are now visible on slices in preview.
2019-11-13 15:55:37 +01:00
97811130a1
Merge branch 'tm_openvdb_integration' into lm_tm_hollowing
...
SLAPrintSteps parallel functions now fully adapted to sla::ccr
2019-11-12 17:11:26 +01:00
4e067c42f0
SLAPrint steps moved to separate module.
...
* Lambdas replaced with class methods
2019-11-12 16:54:59 +01:00
0c4507141a
Attempt to fix Mac build on buildserver
2019-11-12 13:19:17 +01:00
a69e80b987
Fix non thread-safe data flow between plater and hollowing gizmo.
2019-11-11 17:27:32 +01:00
35ba7a481c
adding precompiled header should probably be the last statement.
2019-11-11 13:56:05 +01:00
c22423a219
Merge branch 'tm_openvdb_integration' into lm_tm_hollowing
...
* Refactor file names in SLA dir
2019-11-11 12:55:22 +01:00
621b8426d3
#3175 - Fixed compatibility with boost v 1.71
2019-11-11 11:21:08 +01:00
b4795e1292
Unified igl calls in MeshRaycaster and EigenMesh3D
...
MeshRaycaster is still aware of the clipping plane but it now uses EigenMesh3D internally
Public interface of both classes is unchanged
2019-11-08 20:18:14 +01:00
49175c3112
Merge remote-tracking branch 'origin/master' into ys_resin_cost
2019-11-08 19:33:18 +01:00
ac8eab5fa8
Enhanced hollowing scheme, closing distance working as expected.
2019-11-08 16:51:43 +01:00
645f13a0ae
Drain holes are now saved in ModelObject
...
Internal changes in GLGizmoHollow.cpp
2019-11-08 14:05:56 +01:00
4b08865809
hollowing params renamed, filtering generalized
2019-11-08 09:21:30 +01:00
588734c7b3
Merge branch 'master' of https://github.com/Prusa3d/PrusaSlicer
2019-11-07 14:35:50 +01:00
f2dd49a905
Merged pull request "Gyroid improvements" #2730
...
by @supermerill and @wavexx
WIP: The function Fill::connect_infill() is being rewritten
to utilize spatial structures wherever possible for lower CPU load
and less dynamic memory allocation.
2019-11-07 14:28:30 +01:00
bc3d22348a
Hollowing params: accuracy and smoothness
2019-11-07 09:34:34 +01:00
1e8aa54559
ENABLE_THUMBNAIL_GENERATOR -> Added ENABLE_THUMBNAIL_GENERATOR_DEBUG (disabled)
2019-11-07 09:01:28 +01:00
a82f1268f3
Hollowed interior is now visible in preview
2019-11-06 14:26:15 +01:00
bdf6f7342e
Hollowing step in SLAPrint process, PrintConfig params added.
2019-11-06 13:38:43 +01:00
4d8631fef6
Merge branch 'tm_openvdb_integration' into lm_tm_hollowing
2019-11-05 14:48:44 +01:00
07fb9f6559
Add oversampling and gaussian filter to hollowing.
...
* Additional steps hollowing and drilling in SPAPrint
* Remove SLABoilerPlate.hpp as it was empty.
2019-11-05 14:48:00 +01:00
eaf815ca4b
Merge branch 'lm_hollow_gizmo' into lm_tm_hollowing
2019-11-05 14:41:06 +01:00
d8dca69d60
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-11-05 13:58:13 +01:00
612e45e783
std::exchange not supported by C++11.
2019-11-05 11:46:05 +01:00
7a7183383f
Merge branch 'master' of https://github.com/BryanSmithDev/PrusaSlicer into BryanSmithDev-master
2019-11-05 11:37:40 +01:00
7542580ac1
Merge branch 'tm_openvdb_integration' into lm_hollow_gizmo
2019-11-05 11:16:51 +01:00
e1c6bd174a
Fixed missing include.
2019-11-05 11:14:00 +01:00
b295bc22db
Adaptive elephant foot compensation: Improvement of the variable
...
offset regularization.
2019-11-05 10:45:14 +01:00
d9d11e5686
Add additional parameters to openvdbutils
2019-11-05 09:43:42 +01:00
76377ee0fe
ENABLE_THUMBNAIL_GENERATOR -> Export thumbnails to gcode as png data in lines with max 80 characters length
2019-11-04 15:38:15 +01:00
7808d09d06
SLA Contour3D expanded with conversions supporting quads.
2019-11-04 14:33:29 +01:00
8b8b6c1821
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-11-04 14:00:36 +01:00
64d5ac0d20
ENABLE_THUMBNAIL_GENERATOR -> Export thumbnails to gcode: max length of gcode lines set to 80 characters
2019-11-04 14:00:26 +01:00
3321ae7f13
+ add FlashAir support for host upload
2019-11-04 12:53:48 +01:00
2399570950
Only enable Elphant foot compensation if printing directly
...
on the print bed (raft is disabled).
2019-11-04 11:34:33 +01:00
4c735192ef
Bugfixes of the new adaptive elephant foot compensation.
2019-11-04 11:26:36 +01:00
c34232214d
Merge branch 'master' of https://github.com/prusa3d/PrusaSlicer into et_plater_thumbnail
2019-11-04 11:13:19 +01:00
bb8d59391f
Fixed missing include
2019-11-01 21:13:53 +01:00
Lukas Matena