Alessandro Ranellucci 183736dd9a Infill flow for bottom layer was calculated incorrectly when first_layer_height != layer_height

2012-11-19 12:37:05 +01:00

..

ExtrusionPath

Refactor shortest_path

2012-10-30 13:59:33 +01:00

Fill

Typo

2012-11-16 18:24:09 +01:00

Format

Remove one more unused line

2012-11-16 22:09:32 +01:00

Geometry

Raise offset scale factor back to 100000 now that Clipper was updated

2012-11-15 10:09:29 +01:00

GUI

Bugfix: AMF export was not working anymore. #799

2012-11-16 22:41:54 +01:00

Layer

Apply Douglas-Peucker to all paths before generating G-code

2012-11-18 17:38:08 +01:00

Print

Do not pass the Print object to SVG::output anymore

2012-11-01 11:34:53 +01:00

Config.pm

Don't emit warnings on unknown options

2012-11-18 17:42:52 +01:00

ExPolygon.pm

Get rid of max_print_dimension in filler objects

2012-10-30 15:09:54 +01:00

Extruder.pm

New --min-skirt-length option. #269

2012-10-29 11:17:57 +01:00

ExtrusionLoop.pm

Only put ExtrusionPath objects in ExtrusionPath::Collection (no ExtrusionLoop objects)

2012-10-31 19:08:29 +01:00

ExtrusionPath.pm

Apply Douglas-Peucker to all paths before generating G-code

2012-11-18 17:38:08 +01:00

Fill.pm

Infill flow for bottom layer was calculated incorrectly when first_layer_height != layer_height

2012-11-19 12:37:05 +01:00

Flow.pm

Keep bridge flow unchanged even with the new overlapping spacing

2012-11-18 15:42:59 +01:00

GCode.pm

Apply Douglas-Peucker to all paths before generating G-code

2012-11-18 17:38:08 +01:00

Geometry.pm

$parallel_degrees_limit decreased, 3 to 0.1, #704

2012-09-27 06:14:54 -07:00

GUI.pm

Remember last used filament presets when using multiple extruders too

2012-10-24 20:24:11 +02:00

Layer.pm

Bugfix: some multimaterial files generated a fatal error

2012-11-05 15:59:31 +01:00

Line.pm

Bugfix: only_retract_when_crossing_perimeters might cause some missed retractions when printing multiple copies of the same object. #786

2012-11-16 12:39:55 +01:00

Model.pm

Show object information when double-clicking it in the plater

2012-10-24 22:44:08 +02:00

Point.pm

Remove unused methods

2012-10-30 15:49:11 +01:00

Polygon.pm

New wkt() method for debugging

2012-11-06 20:31:50 +01:00

Polyline.pm

Require Math::Clipper 1.14 and increase scale factor for offset(). #720

2012-11-05 00:17:46 +01:00

Print.pm

Append full config when --gcode-comments is enabled

2012-11-18 19:53:52 +01:00

Surface.pm

Remove all id() and ordered_id() methods

2012-07-22 21:00:02 +02:00

SVG.pm

Do not pass the Print object to SVG::output anymore

2012-11-01 11:34:53 +01:00

TriangleMesh.pm

Do not pass the Print object to SVG::output anymore

2012-11-01 11:34:53 +01:00