47cc9687a0
Added a new switch: ensure_vertical_shell_thickness
...
This enables a zig-zag infill similar to Cura or Simplify3D
on overhangs.
2016-10-16 22:11:19 +02:00
7d7f093120
C++ supports sketched, but not finalized yet. Slic3r is still using
...
the old Perl supports, but this time with the C++ fillers.
2016-10-16 16:30:56 +02:00
8f40d9b34e
Initial implementation of C++ supports,
...
some documentation of the existing code.
2016-10-13 16:00:22 +02:00
c16eca0065
Improvements of the C++ RectInfill2 code for supports:
...
Make the contours more continuous.
Some documentation, asserts and such.
2016-10-06 21:41:52 +02:00
ee4b9ab82f
Select standard camera views (left / right / top / bottom / front / rear / default)
...
by menu.
2016-10-05 14:13:07 +02:00
5268574ade
Made the sheath around the base support configurable. Without the sheath
...
it is easier to remove the support, but the support is more fragile.
2016-10-04 14:38:13 +02:00
5bb37ad2c4
A new feature "support_material_buildplate_only" implemented.
...
Also a bug has been fixed for zero interface layers. Before
slic3r would put infinite number of interface layers over top surfaces,
if the number of interface layers was set to zero.
2016-10-04 13:54:10 +02:00
ae2bae137a
Added a low layer slider into the 3D preview window.
...
This is to limit the preview to a span of layers.
2016-10-03 17:01:29 +02:00
b7af7276c9
Instantiate the new C++ filler. It will be used for the supports first.
2016-10-03 16:59:00 +02:00
d2635ab799
Finished merging of bridging regions.
2016-09-30 16:11:19 +02:00
3a81e6bee4
Bugfix of bottom bridges. If close regions shall be closed by bridges,
...
these regions are grown to anchor the bridge lines to the bottom surface.
The grown regions may overlap. In that case the regions are now merged
before the bridging direction is calculated for the merged region.
2016-09-30 15:23:18 +02:00
b5e24d3527
Fix of a test case of PerimeterGenerator.
2016-09-28 11:17:59 +02:00
403329db49
Misc bugfixes.
2016-09-26 13:58:47 +02:00
790b640521
Visualization of fill surfaces.
2016-09-26 13:56:24 +02:00
e0d1aa8a1a
Collect the perimeter surfaces when generating perimeters.
...
The perimeter surfaces are later used for performing infill
below overhangs and to maintan configured vertical wall thickness
at sloping surfaces.
2016-09-26 13:44:23 +02:00
8f04f5d5f6
Don't adjust width of infill. It produces dangerously wide fills.
...
If the infill flow adjustment is enabled, report cases,
where the infill flow grows over the limits.
Make the internal bridging infill 50% sparse.
2016-09-26 13:38:37 +02:00
6950ce3bcf
Report when the threading is disabled and when the debugging output
...
is enabled.
Two new environment variables are respected:
SLIC3R_SINGLETHREADED and SLIC3R_DEBUGOUT.
2016-09-26 12:57:15 +02:00
c514e731da
Documented the bridge detector.
2016-09-26 12:53:41 +02:00
feb269c97c
G code generator will include marks for the G-code analyzer, so
...
the path preview will be colored with a fine granularity.
2016-09-26 12:52:40 +02:00
8564ac391c
Test case for Bugfix: use Lift-z option for 2. extruder #3385
...
thanks to
https://github.com/platsch
2016-09-26 12:50:05 +02:00
088b0dab90
Bugfix: use Lift-z option for 2. extruder #3385
...
Thanks to https://github.com/platsch
https://github.com/alexrj/Slic3r/pull/3392
2016-09-26 12:49:29 +02:00
edc70e27d9
New routines for debugging visualization of surfaces & infills.
2016-09-26 12:45:23 +02:00
4046552dd1
Documented MultiPoint.
2016-09-26 12:44:45 +02:00
758458e5a0
PressureEqualizer - fixed compiler warnings, documented.
2016-09-26 12:44:03 +02:00
4a13efd081
Surface / Surface Collection - optimization routines for filtering,
...
routines for visualization.
2016-09-26 12:42:44 +02:00
a506030082
Draft of a 3D toolpaths preview.
2016-09-26 12:38:29 +02:00
03b1312f2d
G-code analyser, first draft. The G-code analyser will be used
...
for advanced visualization of the printing paths, including
the extrusion types.
2016-09-26 12:37:54 +02:00
565146d9d1
Fix of a spiral vase with realtive extruder distances enabled.
...
The clone function is used by the SpiralVase.pm only, so the change
is safe.
2016-09-23 12:59:20 +02:00
6e97b9bb73
Optimization of the layer offsets in 3D visualization.
2016-09-15 12:26:53 +02:00
459a42aab6
Fixed a bug in conditional compilation of the Shiny profiler.
2016-09-15 00:57:40 +02:00
a53bd3dfe9
Generate multiple vertex lists rather than requesting a single huge
...
memory block.
2016-09-15 00:06:42 +02:00
2a5095a1ea
OpenGL support through GLEW. Only active if compiled with SLIC3R_GUI=1.
2016-09-14 16:31:26 +02:00
266e1c4be1
Initial commit of the GLEW library for calling OpenGL from the C++ code.
2016-09-14 14:07:41 +02:00
b1575b4dcb
Integration of the Shiny lightweight intrusive profiler.
2016-09-14 11:43:38 +02:00
4c67230436
Documented the purpose of various perl modules.
2016-09-14 11:22:41 +02:00
55218c8c4d
Documented.
...
Fixed rough Z buffer quantization issues with ortographic camera.
Initial implementation of a perspective camera.
2016-09-14 09:38:59 +02:00
17d9c8c9dd
fixes for gcc: Missing include float.h
2016-09-13 15:59:23 +02:00
7d56827e26
updated for older gcc
2016-09-13 15:29:31 +02:00
f73ca007e6
Fixed compilation on old gcc.
2016-09-13 15:15:44 +02:00
15c1edd552
Configurable volumetric extrusion rate slope.
2016-09-13 15:02:28 +02:00
620c6c7378
Ported from the playground branch. Various documentation and optimization.
2016-09-13 13:30:00 +02:00
a5b7f14dfa
Updates in the C++ infill code.
2016-09-13 11:26:38 +02:00
b2a6f43923
Documented perl modules.
2016-09-13 11:24:55 +02:00
6dfe4c0b96
Debugging code: Storing the test STLs inlined in the Perl code into a file.
2016-09-13 09:48:29 +02:00
068f71847e
Some inlining optimizations.
2016-09-13 09:46:41 +02:00
c443f49da3
Fix in splitting the loop at a new point.
2016-09-13 09:44:30 +02:00
f518e0675c
Initial commit of the new Pressure Equalizer, the EdgeGrid
...
signed distance field structure.
The EdgeGrid is used to avoid placing the seams on overhangs.
2016-09-12 16:25:15 +02:00
73cbb4b5dc
some optimizations of Point rotation
2016-09-12 13:52:31 +02:00
9a83d4e8d5
Reverted some now unnecessary changes. Reverted the infill to the original perl implementation.
2016-09-12 13:26:17 +02:00
9fcc8fe9ae
Meged with release_candidate_1_3
2016-09-12 11:29:39 +02:00
bubnikv